Through our advanced Adhesive Technology, you are going to achieve structural bonds on a wide range of similar or dissimilar materials.
This unique family of products possesses exceptional bond strength, with excellent aging and weathering characteristics.
No other adhesives offer a better combination of convenience, ease of use, dependability and strength with the fastest curing time on the Market today.
Use the Max 1 Glue by itself on easy to bond items such as Glass or PVC.
For porous materials and uneven breaks simply apply some Max Accelerator on only one side, set aside, apply some Max 1 Glue on the opposite side and press together for a few seconds, that way you create a chemical welding process and it cures right away.
For cracks and holes apply the Max 1 Glue into the area you need to repair and sprinkle the Max 1 Glue Filler on top, the 2 products will cure and harden up within a few minutes. Repeat the process if you are dealing with a deeper or larger crack. After a few minutes you can sand the material down with sandpaper, stain or paint over the area, or if you used the Glue and the filler for a stripped out screw hole, you can drill through it after the cure time.
Tip from Technical Support: If you are not sure wether to use the Accelerator or not, use it , it never hurts and makes the bond faster curing.
All of our Max 1 Glue Bottles are fitted with a build in pin inside the cap, that way whenever you close the Bottle again, the Pin is going to prevent the nozzle from drying out.
There are no reviews yet.